KEPLER Search Output Columns
This document defines the catalog entries describing
the KEPLER Data Archive.
Clicking on entries in this column will mark the entry for retrieval.
To mark all entries, click one of the buttons labelled
'Mark All','Mark public', or 'Mark Proprietary'.
(Unmarking all entries can be done the same way
using the appropriate button.)
For missions with proprietary data, the mark button element
will have a yellow background and a '@' symbol to indicate
data sets not yet public.
Click the button labelled 'Submit marked data for retrieval from
STDADS'. This will send all the marked data set names to the
data retrieval page. Follow the directions on the displayed pages.
After selecting up to 15 observations to be plotted, click on
the "Plot marked spectra" button to coplot the selected observations.
The spectra that you selected will be automatically scaled
to the full range of wavelengths and nearly the full range of
fluxes (i.e., y axis plot scale runs from 0 (or .25 * the minimum flux
for spectra with negative fluxes) to the 10th highest flux). Each
spectrum is automatically assigned a color, up to a maximum of 15.
For plotting Kepler light curves, y-axis scaling is slightly different.
Plots scale simply from the minimum to the
maximum flux. It is also recommended that only Kepler light curves
from the same target be co-plotted due to the differences in flux values.
The spectra are labelled by their dataset names, with a
summary of the datasets plotted given below the plot. After inspecting
the plot, you may wish to change the selection of datasets which are
displayed. Use your browser "Back" button to do this.
Adjust the minimum and maximum wavelengths (in Angstroms)
and minimum and maximum fluxes (in erg /cm2/sec/A) to select the
spectral region of interest and to exclude noisy data.
Note Kepler light curves are in units of time and uncalibrated fluxes.
Adjust the X size and Y size in pixels to create the size of plot
desired. The maximum dimensions are 850 by 640 pixels.
Use this button to replot the spectra when you have changed the plot range or plot dimensions.
- Kepler ID
- Non-unique Kepler ID identifying corresponding entry in the Kepler Input Catalog. Note multiple observations can be made with the same Kepler ID. Also used in naming data files.
range: 757,076 to 12,984,404
- Investigation ID
- Investigation ID assigned by the Kepler project describing a particular GO or project observing program.
EX, STKS, GO1000, etc
- Pep ID
- An integer representation of the investigation ID used by Data Management.
range 13 to 56
- Dataset Name
- Dataset name associated with exposure in the form kplr[kepler_id]_[timestamp].
KPLR00000020_2010203153838, KPLR02961618_2010169030214, KPLR001028012-2009168180601
- RA (J2000)
- Right Ascension in decimal degrees (converted from the KIC decimal hours value)
range: 279.63 to 301.82, although values are stored in decimal degrees, valid formats for queries include: "19 28 29.65", "19h28m29s", 292.12354
- Dec (J2000)
- Declination in decimal degrees (from KIC)
range: 36.56 to 52.47, stored in decimal degrees but can be queried using values such as: "+37 14 04.5", "37.23458"
- Target Type
- 2-character Target type
Either LC (long cadence) or SC (short cadence)
- Actual Start Time
- Start time from LC_START FITS keyword (?)
range: 2009-05-02 00:40:43 to 2009-05-13 00:15:49
- Actual End Time
- End time from LC_END FITS keyword
range: 2009-05-11 17:51:31 to 2009-06-15 11:47:11
- Release Date
- Date on which data becomes public
range: 2009-10-14 12:00:00 to 2011-11-17 14:57:43 Note, as with all MAST datetime fields, the following examples are valid date formats when submitting queries: "< Jan 10 2008", "Jul 1 2009 .. Aug 1 2009", "1/1/2008", "2009 Jul 15 14:30:20"
- RA PM
- RA proper motion
range: -0.80 to 0.89 arcsec/yr
- Dec PM
- Dec proper motion
range: -0.81 to 0.71 arcsec/yr
- U Mag
- U-band magnitude accurate to 0.04 magnitude
range: 10.23 to 20.8
- G Mag
- G-band magnitude
range: 6.39 to 21.21
- R Mag
- R-band magnitude
range: 5.9 to 17.41
- I Mag
- I-band magnitude
range: 6.82 to 18.31
- Z Mag
- Z-band magnitude accurate to 0.03 magnitude
range: 5.842 to 17.63
- GRed Mag
- GRed-band magnitude
range: 8.52 to 18.27
- D51 Mag
- D51-band magnitude
range: 7.9 to 17.51
- J Mag
- 2MASS J-band magnitude
range: 1.07 to 17.02
- H Mag
- 2MASS H-band magnitude
range: 0.01 to 16.72
- K Mag
- 2MASS K-band magnitude
range: 0.001 to 17.12
- KEP Mag
- Kepler-band magnitude as derived in the Kepler Input Catalog.
Relative to B and V magnitudes from the Tycho-2 catalog, the Kepler magnitude is calculated as follows:
blue = 0.54*B + 0.46*V - 0.07
red = -0.44*B + 1.44*V + 0.12
color = blue - red
if color <= 0.8
kepmag = 0.8*red + 0.2*blue
kepmag = 0.9*red + 0.1*blue
range: 5.86 to 17.43
- 2MASS ID
- 2MASS catalog ID, a sexagesimal, equatorial position-based source name in the form: hhmmssss+ddmmsss[ABC...] (Note this entry was added by MAST, and was not included in the KIC).
- 2MASS Designation
- Unique 2MASS catalog ID
range: 79221108 to 1305757434
- SCP ID
- Unique SCP processing ID
range: 79226018 to 1305757434
- Alt ID
- ID from alternate source catalog (see Alt ID Source entry)
range: -1224784 to 1065212930
- Alt ID Source
- Source catalog that was used for deriving stellar parameters.
current range is from 1 to 5 but the definitions are:
0 - null, 1 - Hipparcos catalog ID, 2 - Tycho2 ID, 3 - UCAC2 ID, 4 - General Catalog of Var. Stars ID, 5 - Lepine proper motion catalog star. altid>0 is 2MASS ID, altid< 0 is a pseudo-id generated by SCP processing, 6 - altid contains 2MASS ID coming from Astroseiseismology catalog, 11 - NED ID, 12 - Extended 2MASS ID, 13 - FIRST ID, 14 - NVSS catalog ID, 15 - VLBA catalog ID, 16 - CHANDRA catalog ID
- Star/Gal ID
- Star/galaxy indicator based on the USNO-B star/galaxy estimator. 1 = USNO-B values 0 to 5, 0 = values 6 to 11. The values 0 - 11 were a measure of the similarity between a given image to a stellar point spread function. 0 is quite dissimilar, 11 means quite similar.
0 = star, 1 = galaxy.
- Isolated/Blend ID
- Isolated/blended indicator
Not yet (and may never be) determined. All values are null.
- Var. ID
- Constant/variable indicator based on data from the General Catalog of Variable Stars. (Additional catalogs will be used in future versions.)
0 - constant, 1 - variable, currently all 0's
- Derived Effective Temperature accurate to 200 K
range: 3124 to 19333 degrees K
- Log G
- Derived Log10 surface gravity accurate to 0.5 dex
range: -0.054 to 6.158
- Derived Log10 Fe/H metallicity accurate to 0.5 dex.
range: -2.57 to 0.62
- Derived Excess B-V reddening accurate to 0.1 magnitude
range: 0.001 to 0.42
- Derived A-V extinction
range: 0.003 to 1.31
- Estimated Stellar Radius (solar = 1.0)
range: 0.18 to 291.3
- Kepmag Source
- Source of Kepler-band magnitude
SCP, 2MASS, UNCAL, PHOTO, and TYBV. SCP - SCP values for sdssg and sdssr were used to compute KEPMAG using equation below . The error for KEPMAG is roughly 0.03 mag., NOCAL - No calibration to optical mag. possible, used for entries from non-optical catalogs. KEPMAG field is null. , 2MASS - Objects found only in 2MASS Catalog with no optical counterpart, KEPMAG is null, UNCAL - KEPMAG copied from a single color of the parent catalog, uncertainty could be 1.0 mag or higher, PHOTO - parent catalog contained a red and blue mag. obtained from Photographic photometry. Values used to compute KEPMAG on the basis of: sdssg=blue sdssr=red color=sdssg-sdssr if (color<=0.8) kepmag = 0.8*sdssr + 0.2*sdssg else kepmag = 0.9*sdssr+0.1*sdssg, internal photographic errors have errors of 0.2 mag suggest KEPMAG errors of 0.03 mag, TYBV - parent catalog is Tycho-2 and this gives B and V magnitudes. KEPMAG value computed from sdssg=0.54*b+0.46*v-0.07 sdssr=-0.44*b+1.44*v+0.12 using same transformation as above to calc. KEPMAG. Errors same as for TYCHO-2 catalog.
- Photometry Qual
- Photometry quality indicator. Placeholder for SCP values not yet determined.
range: 1 to 8 which is the count of non-null entries in USNO-B1.0 (O,E,J,F,N), UCAC-2 (R), TYcho-2 (B,V). In general the more colors the more likely the star is real. For NOCAL and 2MASS entries, this value = 0.
- Astrophysics Qual
- Astrophysics quality indicator. Placeholder for SCP values not yet determined.
range: 0 to 6 which is the count of non-null entries in Teff, logG, FeH, AV, E(B-V), and Radius.
- Catalog key
- Unique integer key to CATKEY database (not currently available)
range: 584880 to 12812776
- Scp Key
- Unique integer key to SCPKEY database table (not currently available)
range: 262005541 to 1305756149
- Parallax in arcsec
range: -.029 - 0.028 arcsec
- Gal Lon
- Galactic Longitude
range: 68.12 to 84.52 degrees
- Gal Lat
- Galactic Latitude
range: 5.553 to 21.48 degrees
- Total PM
- Total proper motion accurate to 20 mas/yr
range: 0.0 to 0.93 arcsec/yr
- G-R color
- G-R color
range: -1.86 to 9.72
- J-K color
- J-K color
range: -1.317 to 8.022
- G-K color
- G-K color
range: -4.89 to 14.573
- RA hours (J2000)
- Right Ascension (J2000) in decimal hours
range: 18.64 to 20.12 hours
- Processing Date
- Date file was ingested into archive